|
|
Post by onecooldude on May 6, 2008 19:18:40 GMT -5
well i bougth this 02 tj sahara for a replacement of my daily driver, it has the 4l , auto tranny, 3.07 gear dana 30/35 combo and a trac lock, plus a bunch of goody like cruise control and a working stereo plus a/c ive decided to name it sarah here are the pic of the jeep and the first mod , the project is officially started the bone stock unmolested little girl  the very first mod , the seat are in great shape so to preserve them and avoid having them become like my yj seat ,i got some seat cover , they fit pretty well the rear seat was a bit loose but i got it tigth enuf , first 80 buck on the ride     also got the biggest battery i could fit in the hole for the winch that will be comming later, and i ordered a brand new windsheild for her more to come later paul |
|
|
|
Post by charles on May 7, 2008 8:30:24 GMT -5
Cool you're finaly trying to preserve something lol
|
|
|
|
Post by LibertyFever on May 11, 2008 10:18:08 GMT -5
I expect to go to Caraquet on Monday or Tuesday Paul. If you'd like I can pick up your wheels form BoCar then.
|
|
|
|
Post by onecooldude on May 11, 2008 15:53:22 GMT -5
yuop
|
|
|
|
Post by onecooldude on May 12, 2008 20:15:51 GMT -5
more parts for sarah today got a set of omix ada 7 ich tj flare got a rugged ridge slip yoke eliminator and last but not least a 6 1/2 inch bds long arm kit pic of those will be taken at the install also got a new alarm installed,3 zone, hood, door and shock sensor  and i got a set of h4 conversion head bulb   oh and bds was kind enuf to dress me up..lol  a big thank you to auto sound and performance in bathurst and rog and ron in shediac bridge, 1 st class customer service as usual  |
|
|
|
Post by onecooldude on May 13, 2008 21:25:09 GMT -5
got some more pic and a little work done on her today new rear fender  all of them fender on and a new windsheild installed  pic of the new style track bar from bds  bds 6 1/2 inch long arm kit  rugged ridge / omix tj winch plate  rugged ridge/ omix sye kit  beaffy shaft from the sye kit  that is all for today |
|
|
|
Post by onecooldude on May 15, 2008 19:02:41 GMT -5
|
|
|
|
Post by onecooldude on May 25, 2008 6:47:37 GMT -5
started the lift and the sye on the tj, as it sits this morning the sye is in , the skid plate and the new bucket for the control arm are in and the front lower control arm are off, boys is it nice to work on something that has never seen winter everything comes off easy, here are more pics new winch tabor 9k  removing case  damn case nut hard to get  transfert case dissasemblie  sye in   cutting the skid plate  no more picture after that as randy was gone home i big thank to jacque and randy |
|
|
|
Post by LibertyFever on May 25, 2008 11:09:58 GMT -5
Well Paul I don't know if I was of much help. I like to think I was there for moral support ;D
I'm glad to see that you've gotten started on yet another Jeep lift. "Sarah" will look sweet once you put the 35's under her.
I left your house at 1:00 AM Paul, when did you & Jacques finish? Today I'm a little burnt out but I'm going to try an get some chores done about the yard & under the Jeep.
You can hang onto my cooler for now Paul. I can always pick it up later in the week.
|
|
|
|
Post by onecooldude on May 25, 2008 12:00:52 GMT -5
we got to empty all the beer inside rndy lol we quit at 2 in the morning...lol
|
|
|
|
Post by onecooldude on May 26, 2008 16:20:42 GMT -5
more work done on the tj here are the pic , thank to my buddy dean for the help lift kit spread out  cutted and etched the frame horn  small part pile  lower rm and brake line on  pit man arm on  pile getting bigger  control arm done  got more done this afternoon but i had to get the kid , wil take more pic tonigth as work and beer drinking carry's on |
|
|
|
Post by John on May 26, 2008 18:01:28 GMT -5
Hi
Are you going to be selling the springs left over from your build, the daughter's TJ could use some front springs.
John
|
|
|
|
Post by onecooldude on May 27, 2008 5:59:56 GMT -5
yes i will just give me a call or come by the house
|
|
|
|
Post by onecooldude on May 27, 2008 16:12:28 GMT -5
well the jeep is 85 % done , left to do -adjust rear pinion angle -adjust caster -tigthen all arms and track bar -align front end -pick up new drive shaft -install drive shaft -bleed brake -test drive -mall crawl here are the pics , in all , all the hardware came loose except on shock bolt in the rear that broke front almost done  jacque at work  front tire clearance  rear dismantled  pile getting bigger  the 1 broken bolt  almost done installing the kit  sitting on its wheel  more to come |
|
|
|
Post by John on May 27, 2008 17:20:36 GMT -5
yes i will just give me a call or come by the house I'll pass your information along to Jessica, she is in Bathurst. I'm in Winnipeg and will not be in that area until Sept for a family rock crawling vacation. John |
|
....but thats all rigth the rigth tire are ordered 
