|
Post by charles on Feb 21, 2008 6:32:30 GMT -5
well last week I went outside and just gave a visual inspection of the underneath of my jeep and saw that I had a front lower control arm that had started to bend and tear apart so time for an upgrade and let me tel u that the warm weather this week was a welcome and I had a chance to acquire the necessary to make the conversion so Monday morning I started the swap and by 10:30 at night I was done on the major cutting and welding installing and test driving up to 70 km/h, Tuesday afternoon was time to recheck the suspension to make sure that nothing had loosened and rechecked all measurement and finally locked my rear end again and changed the oil at the same time [img src="[/img] i225.photobucket.com/albums/dd199/chucky_24/DSCN7583.jpg"]
|
|
|
Post by onecooldude on Feb 21, 2008 19:30:46 GMT -5
long arm heee
|
|